- Home
- ยป
- Our Products
- »
- Hydraulic Oils
Hydraulic Oils
Hydraulic oil is a non-compressible fluid that is used to transfer power within hydraulic machinery and equipment. Otherwise known as hydraulic fluid, hydraulic oil can besynthetic- or mineral-based.
At Crown Oil, as a hydraulic oil supplier, we deal with 99% of mineral-based hydraulic oils.
Although this useful fluid is commonly used in the transfer of power, hydraulic fluid can act as a sealant, coolant and lubricant within machinery and equipment.
Hydraulic Oil Hlp 32
Minimum Order Quantity: 5 Litre
Vehicle Type | Heavy Vehicle |
Composition | Anti-Wear |
Flash Point | 214 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 5.32 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 30.8 cSt |
Pour Point | -18 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Castrol Atf Dex Ii Oils
Minimum Order Quantity: 1 Litre
Brand | Zebrol |
DENSITY @ 15 DegreeC | 0.878 g/ml |
KV @40 DegreeC | 39.9 cSt |
KV @100 DegreeC | 7.5 cSt |
Viscosity Index | 158 |
Flash Point DegreeC | 205 |
Pour Point DegreeC | -42 |
- Benefits: Provides superior thermal and oxidative stability, smooth gear-changing through balanced friction modifier characteristics and excellent coefficient of friction profile after extended clutch testing, insuring optimal performance on the road
- Excellent low temperature fluidity, anti-wear and frictional properties of these fluids allow it to satisfy the needs of certain hydraulic requirements
Additional Information:
- Delivery Time: Ready Stock
Hydraulic Oil HVLP 220
Minimum Order Quantity: 5 Litre
Composition | Anti-Wear |
Flash Point | 250 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 19.3 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 221.4 cSt |
Pour Point | -9 |
Viscosity Index | 98 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Zebrol Hydraulic HLP 150
Minimum Order Quantity: 5 Litre
DENSITY @ 15 DegreeC | 0.871 g/ml |
KV @40 DegreeC | 151.4 cSt |
KV @100 DegreeC | 15.05 cSt |
Flash Point DegreeC | 246 |
Pour Point DegreeC | -9 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready stock
Hydraulic Oil HLP 100
Minimum Order Quantity: 5 Litre
Brand | ZEBROL |
Composition | Anti-Wear |
Flash Point | 240 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 11.32 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 97.6 cSt |
Pour Point | -9 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Hydraulic Oil HLP 68
Minimum Order Quantity: 5 Litre
Density | 0.8602 g/ml |
Flash Point | 228 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 8.9 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 68.2 cSt |
Pour Point | -15 |
Viscosity Index | 104 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Hydraulic Hlp 46 Oil
Minimum Order Quantity: 5 Litre
Density | 0.8565 g/ml |
Flash Point | 220 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 6.83 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 45.6 cSt |
Pour Point | -18 |
Viscosity Index | 104 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Castrol Excavator TH 46
Brand | Castrol |
Usage/Application | Automotive |
Grade | ISO VISCOSITY GRADE 46 |
Vehicle Type | Heavy Vehicle |
Unit Pack Size | 5, 20, 55, 210 |
Packaging Type | Drum |
Flash Point | 213 DEGREE CELCIUS |
Max. Viscosity | 46 |
Density | 0.833g/ml |
APPLICATION:Castrol Excavator Fluid TH-46 is specially approved for hydraulic systems by telcon for all Tata-Hitachi Ex series construction equipments.CONSUMER BENEFITS:
- Reduces wear of hydraulic pumps and moving components
- Continuous Trouble Free Operation
- Total Hydraulic System Protection
- Peak Performance at all times
- Extended Equipment Life
Additional Information:
- Delivery Time: ready stock
Hyspin Heavyduty Range 32 , 46, 68
Grade | 32,46, 68 |
Usage/Application | Lubrication |
Brand | castrol |
Vehicle Type | Heavy Vehicle |
Type | hydraulic |
Density | 0.88 g/ml |
Flash Point | >200 and < 392 degree celcius |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 32 , 46 and 68 respectively to the grade |
Pour Point | -18/0 |
Viscosity Index | >95 |
Castrol understands the importance of choosing the right hydraulic fluid for your fleet. That is why we offer a wide range designed to protect and improve the efficiency of various hydraulic systems.
Castrol has developed a range of hydraulic fluids to meet performance standards required by Original Equipment Manufacturers (OEMs). This includes products that can offer:
- Improved oxidation stability to accommodate higher operating temperatures
- Improved air release, foam control and water separation to handle smaller reservoirs and reduced cycle times
- Improved dry/wet filterability due to reduced filter pore size and tolerance to water contamination
- Better hydrolytic stability to handle water contamination
- Extended pump life to meet Denison T6H20C pump performance
- Increased drain intervals requiring the lubricants to retain original performance longer
Additional Information:
- Delivery Time: ready stock
Gulf Harmony Aw 10,15,22 ,32,46, 68, and 100
Brand | Gulf |
Packaging Type | Barrel |
Colour | LIGHT YELLOW |
VISCOSITY @ 40 DEGREE CELCIUS | 10,15,22 ,32,46, 68, and 100 DEPENDS ON THE GRADE |
Density | 0.87 -0.88 g/ml |
Viscosity Index | 90- 95 |
Gulf Harmony AW series are high performance anti-wear hydraulic oils developed for high pressure
hydraulic systems operating under moderate to severe conditions in mobile and industrial service. These oils
are formulated with high quality base oils and carefully selected performance additives to provide excellent
protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam
control, water separation and rapid air release properties. They exceed the performance requirements of
global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and
majority of the international OEMs viz. Denison, Fives Cincinnati (MAG IAS, LLC) & Eaton (Vickers).
Additional Information:
- Delivery Time: one day
Shell Hydraulic Oil
Usage/Application | Lubrication |
Brand | SHELL TELLUS |
Composition | Anti-Wear |
Type | hydraulic and circulating |
Density | 0.87-0.88 g/ml |
Flash Point | 160 degree celcius to 230 degree celcius |
Pour Point | -18/0 |
Viscosity Index | >95 |
Color | YELLOW |
AeroShell Fluid 41 | Superclean special application mineral fluid | 14.1 | 5.3 |
Shell Tellus S2 VX 15 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 15 | 3.7 |
Shell Tellus S2 VX 22 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 22 | 4.8 |
Shell Tellus S2 VX 32 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 32 | 6.1 |
Shell Tellus S2 VX 46 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 46 | 7.9 |
Shell Tellus S2 VX 68 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 68 | 10.5 |
Shell Tellus S2 VX 100 | High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures | 100 | 14 |
Shell Tellus S3 M 46 | Premium, zinc-free, industrial hydraulic fluid | 46 | 6.8 |
Shell Tellus S4 VX 32 | Ultra-low-temperature hydraulic fluid | 33.8 (2,624 at -40°C)| 9.99 |
Additional Information:
- Delivery Time: ready stock
Hi-Tec Hydraulic Oil
Brand | HI -TEC |
Packaging Size | 50 LTR |
Vehicle Type | Heavy Vehicle |
Composition | Anti-Wear |
Type | hydraulic |
Density | 0.87-0.88 g/ml |
Other Details:
- Hi-Tec Hydraulic Oil is blended from high-quality mineral oils possessing a high viscosity index and low pour point.
- Hi-Tec Hydraulic Oils provide a long trouble free service life and will be chemically stable under severe operating conditions.
- They give excellent protection against corrosion; resist emulsification and any formation of unwanted stable foam.
- The continuing trend towards higher hydraulic system pressure permits higher performance and reductions in pump and equipment sizes.
- At the same time, the hard-working hydraulic oil is called upon to lubricate, seal and cool the working components under increasing temperature, turbulence and pressure.
- Any entrained air must be readily released as pressures often exceed 7 MPa (1000 psi) and heavy pump water can only be avoided by using oils containing anti-wear additives.
- Hi-Tec Hydraulic Oil is formulated to meet all these requirements, using paraffinic, high viscosity index mineral oil, augmented with performance additives including a zinc anti-wear treatment.
Benefits:
- Superior hydrolytic stability
- Outstanding thermal and oxidation stability
- Good demulsibility and anti-foam properties
- Excellent EP performance
- Excellent rust protection
- Lower tendency to block filters
- Reduced pump wear
Oxidation, wear and corrosion tests established by Dennison and Vickers are amongst the most severe in the industry and are widely recognized by other equipment manufacturers.
Additional Information:
- Delivery Time: ONE DAY
Servosystem 22 , 32 , 46 , 57 ,68 , 81, 100 And 150
Type | hydraulic and circulating |
Density | 0.87-0.88 g/ml |
Flash Point | 160 degree celcius to 230 degree celciu |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 22 , 32 , 46 , 57 ,68 , 81, 100 and 150 depends on the grade |
Viscosity Index | 90-95 depends on the grade |
Color | pale yellow |
Country of Origin | Made in India |
Servo hydraulic oils are high quality anti-wear type lubricants recommended for hydraulic systems and a wide variety of circulation systems of Industrial equipments. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipments having silver-coated components. These oils pass Vickers V-104C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004).
Additional Information:
- Delivery Time: ready stock
Hydraulic 68
Minimum Order Quantity: 5 Litre
Vehicle Type | Heavy Vehicle |
Composition | Anti-Wear |
DENSITY @ 15 DegreeC | 0.849 g/ml |
KV @40 DegreeC | 66.87 cSt |
KV @100 DegreeC | 11.6 cSt |
Flash Point DegreeC | 235 |
Pour Point DegreeC | -17 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Plant Oil Base Oil SN 500
Minimum Order Quantity: 210 Litre
Type | Mineral Based Oil |
Color | Yellow |
Unit Pack Size | 210 litre |
Density | 0.85-0.87 g/ml |
Brand | Zebrol |
Flash Point | 235 |
Viscosity 40 C | 36 |
Rust Damage Control | Yes |
Eliminates Friction | Yes |
Country of Origin | Made in India |
Additional Information:
- Delivery Time: Ready Stock
Virgin Base Oil
Minimum Order Quantity: 210 Litre
Packaging Type | Barrel |
Usage/Application | Making Lubricants |
Unit Pack Size | 210 |
Type | Mineral Oil |
Brand | ZEBROL |
Flash Point | 255 |
Physical State | LIQUID |
Viscosity 40 C | 91 cst |
Country of Origin | Made in India |
Other Details:
Specification
Bright & Clear
Visual Color 1.5-2.0 ASTM D1500
Density@15 CKg/M3—885—ASTM D1298
Flash Point(Coc)^C235 ASTM D92
Pour Point^C 3 ASTM D97
Viscosity, Kin@100^CCst 11 ASTM D445
Viscosity Index—90—95Astm D2270
Additional Information:
- Delivery Time: Ready Stock
Total Azolla Zs 32,46 and 68
Brand | ELF |
Packaging Type | Barrel |
Country of Origin | Made in India |
Colour | PALE YELLOW |
VISCOSITY @ 40 DEGREE CELCIUS | 32,46 OR 68 respectively |
Viscosity Index | >95 |
Additional Information:
- Delivery Time: Ready Stock
HP ENKLO
Brand | HP |
Unit Pack Size | 26 LTR AND 210 LTR |
Kinematic Viscosity | 68 |
Flash Point | 210 |
Color | LIGHT YELLOW |
Drum Material | MS |
ENKLO 68 PREMIUM is blended from deep hydrofinished base stocks and select additives. The additives are designed for optimum compressor operation. The additives are used to enhance the oxidation stability, anti-rust characteristics, anti-wear properties of the oil. The oil has natural demulsification property, low foaming tendency and quick air release property
ENKLO 68 Premium is designed for improved reliability of screw compressor.
- Ensures better lubrication of rotors and bearings thereby reducing heat generation and lowering operating temperatures
- Enhanced wear protection resulting in prolonged maintenance-free equipment life
- Outstanding oxidation and thermal stability
- Excellent hydrolytic stability
- Maintains excellent internal surface cleanliness
- Good protection against corrosion
- Good demulsifying properties
- Low foaming tendency
- Excellent seal compatibility
- Double the drain interval in screw compressor compared to conventional IS:10522 grade hydraulic oil
Additional Information:
- Delivery Time: READY STOCK
Hydraulic Oil HVLP 460
Minimum Order Quantity: 5 Litre
Country of Origin | Made in India |
DENSITY @ 15 DegreeC | 0.894 g/ml |
KV @40 DegreeC | 465.6 cSt |
KV @100 DegreeC | 30.8 cSt |
Flash Point DegreeC | 260 |
Pour Point DegreeC | -6 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready stock
Hydraulic Oil HVLP 320
Minimum Order Quantity: 5 Litre
Composition | Anti-Wear |
Flash Point | 252 |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 24.4 cSt |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 320.1 cSt |
Pour Point | -9 |
Viscosity Index | 97 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Mak Hydrol Aw 68, Hydrol HLP, HLP SC, HLPD, Spindle, Hydrovis Power, Hydrol P, Hydrol TQ ,Hydrol XHD
Brand | MAK |
Packaging Size | 26 LIT AND 210 LIT |
Composition | Anti-Wear |
Type | hydraulic and circulating |
Density | 0.87-0.88 g/ml |
Flash Point | 160 degree celcius to 230 degree celciu |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 22 , 32 , 46 , 57 ,68 , 81, 100 and 150 depends on the grade |
Pour Point | -18/0 |
Viscosity Index | 90-95 depends on the grade |
Color | YELLOW |
MAK Hydrol AW range is a group of premium quality, transparent and antiwear hydraulic oils. They are blended from hydro-processed, high viscosity index base oils with carefully selected antiwear and other additives. These oils are designed to operate over a wide range of working conditions including low load and severe high load conditions. High rate of water separation, exceptional hydrolytic stability, anti-foam and cleanliness allow efficient operation of the system. These oils ensures high level of antiwear property and film strength.
Additional Information:
- Delivery Time: READY STOCK
Mobil Hydraulic Aw 32 , 46, 68 And 100
Usage/Application | Automobile |
Vehicle Type | Heavy Vehicle |
Type | hydraulic |
Density | 0.87-0.88 g/ml |
Flash Point | 160 degree celcius to 230 degree celciu |
Pour Point | -18/0 |
Viscosity Index | 90-95 depends on the grade |
Color | YELLOW |
Additional Information:
- Delivery Time: READY STOCK
Hydraulic 100
Minimum Order Quantity: 5 Litre
DENSITY @ 15 DegreeC | 0.856 g/ml |
KV @40 DegreeC | 102.3 cSt |
KV @100 DegreeC | 15.15 cSt |
Flash Point DegreeC | 242 |
Pour Point DegreeC | -10 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Hydraulic 46
Minimum Order Quantity: 5 Litre
Country of Origin | Made in India |
DENSITY @ 15 DegreeC | 0.847 g/ml |
KV @40 DegreeC | 47.5 cSt |
KV @100 DegreeC | 9.456 cSt |
Flash Point DegreeC | 187 |
Pour Point DegreeC | 224 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Hydraulic 32
Minimum Order Quantity: 5 Litre
Property | Extreme Pressure |
Country of Origin | Made in India |
DENSITY @ 15 DegreeC | 0.835 g/ml |
KV @40 DegreeC | 31.38 cSt |
KV @100 DegreeC | 6.893 cSt |
Flash Point DegreeC | 241 |
Pour Point DegreeC | -9 |
- Superior anti-wear properties reduce metal to metal contact at high temperature tends to increase pump and hydraulic systems life.
- Seal compatibility with various type seal avoids leakage issue.
- Good anti-foaming and anti-rusting properties reduce cavitations.
Additional Information:
- Delivery Time: Ready Stock
Total Acantis Hm 32, 46,68,100
Usage/Application | Lubrication |
Brand | ELF |
Packaging Size | 210 LITRES |
Vehicle Type | Heavy Vehicle |
Composition | Anti-Wear |
Type | hydraulic and circulating |
Density | 0.87-0.88 g/ml |
Flash Point | >190 DEGREE CELCIUS |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 32 , 46, 68 AND 100 respectively to the grade |
Pour Point | -18/0 |
Viscosity Index | 90-95 depends on the grade |
Color | YELLOW |
Hydraulic oil is a non-compressible fluid that plays a vital role in the smooth operation of hydraulic systems. In addition to its primary role in transferring power and heat within hydraulic systems, it has a few secondary functions—contamination removal, sealing, and lubrication.
Hydraulic oil has a wide variety of applications. It powers forklifts and log splitters, allows pilots to control vital systems within aircraft, and ensures the proper functioning of hydraulic brakes on tractors and other farm equipment.
Hydraulic oils are of two types. They can either be mineral (extracted from naturally occurring crude oil deposits that have undergone a refining process) or synthetic (engineered by chemical synthes
Additional Information:
- Delivery Time: ONE DAY